Faraday’s Law – JEE First

Terminal velocity in a magnetic field

February 23rd, 2022jeefirst0 Comments

A copper connector of mass $m$ slides down two smooth copper bars, set at an angle $\alpha$ to the horizontal, due to gravity (see figure). At the top the bars are interconnected through a resistance $R$ . The separation between the bars is $\ell$ . The system is located in a uniform magnetic field of induction $B$ , perpendicular to the plane in which the connector slides. The resistance of the bars, the connector and the sliding contacts, as well as the self-inductance of the loop are assumed to be negilible. If the connector is released from rest at $t=0$ ,

Find the velocty $v(t)$ of

…

Electromagnetic induction in a twisted loop

February 21st, 2022jeefirst0 Comments

JEE Advanced 2017 Paper 1, Question 5

A circular insulated copper wire loop is twisted to form two loops of area $A$ and $2 A$ as shown in the figure. At the point of crossing the wires remain electrically insulated from each other. The entire loop lies in the plane (of the paper). A uniform magnetic field ${\bf B}$ points into the plane of the paper. At $t=0$ , the loop starts rotating about the common diameter as axis with a constant angular velocity $\omega$ in the magnetic field. Which of the following options is/are correct?

Rendered by QuickLaTeX.com

The emf induced in the loop is proportional to the sum

…

Conducting wire in a magnetic field

December 30th, 2021jeefirst0 Comments

JEE Advanced 2019 Paper 1, Question 6

A conducting wire of parabolic shape, initially $y = x^2$ , is moving with velocity $\vec v = v_0 \hat i$ in a non-uniform magnetic field $\vec B = B_0 \left( 1 + \left( \frac{y}{L} \right)^\beta \right) \hat k$ , as shown in the figure below. If $v_0, B_0, L$ and $\beta$ are positive constants and $\Delta \phi$ is the potential difference developed between the ends of the wire, then the correct statement(s) is/are:

Rendered by QuickLaTeX.com

$|\Delta \phi| = \frac{1}{2} B_0 v_0 L$ for $\beta = 0$ .
$|\Delta \phi| = \frac{4}{3} B_0 v_0 L$ for $\beta = 2$ .
$|\Delta \phi|$ remains the same if the parabolic wire is replaced by a straight wire, $y=x$ initially, of length $\sqrt{2} L$ .
$|\Delta \phi|$ is proportional to the length of the wire projected on the $y$ axis.